• Guangzhou Shusen Trading Co., Ltd.
    The product introduction is very professional, the service attitude is very good, the product quality is high, and will continue to support.
  • Guangzhou Shusen Trading Co., Ltd.
    The service staff is very professional, with a wide range of products and guaranteed prices. Everyone can choose it. I hope the company will get better and better.
Contact Person : Sylvia
Phone Number : +86 13719030715
WhatsApp : +8613719030715

NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9

Place of Origin China
Brand Name NEC
Model Number UHP330/264W 1.3 E19.9
Minimum Order Quantity 1 piece
Price Negotiated
Packaging Details carton box
Delivery Time 3-7 work days
Payment Terms L/C, D/A, D/P, T/T, Western Union
Supply Ability 1000 pieces per year
Product Details
Life Expectancy 2000hours Warranty 90 Days
Application School,Office,Home,Education,Business Product Name Projector Lamp Bulb
Brightness High Brightness With Original Burner Inside Voltage All Country
Base Type UHP330/264W 1.3 E19.9 Rated Power 330W/264W
High Light

NP06LP NEC Projector Bulbs


UHP330 NEC Projector Bulbs


E19.9 NEC Projector Bulbs

Leave a Message
Product Description

NP06LP NEC Projector Bulbs 60X60mm UHP330/264W 1.3 E19.9 Bare projector lamp
NP06LP  NEC projector lamp with housing, all items are 100% new and pass the quality checked. And will be packaged in good condition before dispatch. 100% Brand New, Premium quality, high brightness, long life replacement projector lamp. Compatible for NP3250,NP3200,NP3151,NP3150,NP2250,NP2200,NP1250,NP1200,NP1150

Product name: Projector Lamp
Model No. UHP330/264W 1.3 E19.9
Condition: 100% Brand new
Type: Compatible Bare lamp 
Lamp power: 330W/264W
Life time : ≥2000-5000HourS
Used in the these projector: NP3250,NP3200,NP3151,NP3150,NP2250,NP2200,NP1250,NP1200,NP1150
Installation: Easy installation.
Warranty: All items have been QC tested and 90 days Warranty at least
Package: Each lamp in a single box with foam protection. One pair gloves and instruction inside.

If you want your Projector Lamps work longer, please Note:
1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.

1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.


NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9 0NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9 1NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9 2NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9 3NP06LP NEC Projector Bulbs 60X60mm UHP330 264W 1.3 E19.9 4