-
Projectors Bulbs
-
Epson Projector Bulbs
-
Panasonic Projector Bulbs
-
Hitachi Projector Bulbs
-
NEC Projector Bulbs
-
Benq Projector Bulbs
-
Vivitek Projector Lamp
-
Sony Projector Lamps
-
Optoma Projector Bulbs
-
Christie Projector Lamps
-
Viewsonic Projector Lamps
-
Sharp Projector Bulbs
-
Mitsubishi Projector Lamps
-
Mini Portable Projectors
-
Projector Accessory
-
RafaelThe product introduction is very professional, the service attitude is very good, the product quality is high, and will continue to support.
-
CharlesThe service staff is very professional, with a wide range of products and guaranteed prices. Everyone can choose it. I hope the company will get better and better.
DT01725 003 005160 01 DHD851 Q DWU851 Hitachi Projector Bulbs
Warranty | 3 Months | Product Name | DT01725 Projector Lamp |
---|---|---|---|
Life Expectancy | 2000 Hours | Voltage | All Country |
Keywords | Projector Lamp | Base Type | UHP365-280W |
Rated Power | 365-280W | ||
High Light | DWU851 Hitachi Projector Bulbs,DT01725,DT01725 Projector Bulb |
DT01725 003 005160 01 DHD851 Q DWU851 Hitachi Projector Bulbs
Projector Bulb DT01725 For Hitachi Projector 003-005160-01 DHD851 DHD851-Q DWU851 DWU851-Q
The DT01725(75X75DUHP365-280W 1.0 E22.7 FA) Projector Lamp from Hitachi for the original lamp in the 003-005160-01 DHD851 DHD851-Q DWU851 DWU851-Q DWX851-Q SWX851 projector. Its estimated life is 5,000 hours in a compatible projector's Normal Mode and 10,000 hours in Eco Mode. Our team provides the best quality products, to provide customers with 100% satisfaction quality service.
Specifications:
Product name: | Projector Lamp |
Model No. | DT01725 |
Type: | Compatible lamp with Housing |
Lamp power: | 365-280W |
Life time : | ≥2000-8000Hour |
Used in the these projector: | 003-005160-01 DHD851 DHD851-Q DWU851 DWU851-Q DWX851-Q SWX851 |
Installation: | Easy installation. |
Warranty: | All items have been QC tested and 180 days Warranty at least |
Package: | Each lamp in a single box with foam protection. One pair gloves and instruction inside. |
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.