-
Projectors Bulbs
-
Epson Projector Bulbs
-
Panasonic Projector Bulbs
-
Hitachi Projector Bulbs
-
NEC Projector Bulbs
-
Benq Projector Bulbs
-
Vivitek Projector Lamp
-
Sony Projector Lamps
-
Optoma Projector Bulbs
-
Christie Projector Lamps
-
Viewsonic Projector Lamps
-
Sharp Projector Bulbs
-
Mitsubishi Projector Lamps
-
Mini Portable Projectors
-
Projector Accessory
-
RafaelThe product introduction is very professional, the service attitude is very good, the product quality is high, and will continue to support.
-
CharlesThe service staff is very professional, with a wide range of products and guaranteed prices. Everyone can choose it. I hope the company will get better and better.
UHP ELPLP68 Epson Projector Bulbs For 3010 3010e 1080p
Life Expectancy | 2000hours | Warranty | 90 Days |
---|---|---|---|
Application | School,Office,Home,Education,Business | Lamp Type | OBH |
Product Name | Projector Lamp Bulb | Brightness | High Brightness With Original Burner Inside |
Base Type | UHE 230W | Lamp Power | 230W |
High Light | ELPLP68 Epson Projector Bulbs,UHP Epson Projector Bulbs,1080p Epson Projector Bulbs |
UHP Projector Lamp ELPLP68 Epson Projector Bulbs for 3010 / 3010e 1080p Projectors
ELPLP68 is Epson original projector bulb (50X50LHSCR230W/75V UHE ), brand new projector lamp, top quality with high brightness, lamp life up to 2500 hours, QC test of all projector lamps. Compatible with EH-TW7200 EH-TW8000 EH-TW8100 EH-TW8200 EH-TW9000 EH-TW9000W EH-TW9100 EH-TW9200 EW-TW9000W.
Specifications:
Lamp Type | CB/OB/CBH/OBH/OM |
P/N. | ELPLP68 |
Lamp Watts | HSCR230W/75V UHE |
Condition | 100% new |
Life time | 2000-3000hours |
Warranty | All items has been QC tested and have 90 days warranty |
Compatible with Projectors |
EH-TW6500C,EH-TW6550C,EH-TW5810C,EH-TW5900,EH-TW6000,EH-TW6000W,Cinema 3010,Cinema 3010e,EH-TW5800C,EH-TW6510C,EH-TW6515C |
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.