-
Projectors Bulbs
-
Epson Projector Bulbs
-
Panasonic Projector Bulbs
-
Hitachi Projector Bulbs
-
NEC Projector Bulbs
-
Benq Projector Bulbs
-
Vivitek Projector Lamp
-
Sony Projector Lamps
-
Optoma Projector Bulbs
-
Christie Projector Lamps
-
Viewsonic Projector Lamps
-
Sharp Projector Bulbs
-
Mitsubishi Projector Lamps
-
Mini Portable Projectors
-
Projector Accessory
-
RafaelThe product introduction is very professional, the service attitude is very good, the product quality is high, and will continue to support.
-
CharlesThe service staff is very professional, with a wide range of products and guaranteed prices. Everyone can choose it. I hope the company will get better and better.
NP29LP M362W M362X M363W M363X NEC Projector Lamp Replacement
Warranty | 3 Months | Packing | Carton Box |
---|---|---|---|
Product Name | NP28LP Projector Lamp | Life Expectancy | 2000 Hours |
Voltage | All Country | Base Type | UHP250W 1.0 E20.9 |
Name | Projector Bulb | Power | 250W |
High Light | M363X NEC Projector Lamp Replacement,NP29LP,NP29LP NEC Projector Lamp |
NP29LP M362W M362X M363W M363X NEC Projector Lamp Replacement
NP29LP Projector Bulb Compatible With NEC M362W M362WS M362X M363W M363X NP-M362W
NEC projector lamp NP29LP (UHP250W 1.0 E20.9) , brand New projector lamp, top quality with high brightness, lamp life up to 2500 hours, QC test of all projector lamps. Comptabile with M362W M362WS M362X M363W M363X NP-M362W NP-M362WJD NP-M363WJD. Our team provides the best quality products, to provide customers with 100% satisfaction quality service. We are willing to strengthen cooperation with each customer to create a better future.
Specifications:
lamp model | NP29LP |
power | UHP250W 1.0 E20.9 |
works for NEC | M362W M362WS M362X M363W M363X NP-M362W NP-M362WJD NP-M363WJD |
life expectancy | 4000-6000hrs |
warranty | 180 days |
MOQ | 1PC |
we provide |
original lamp compatible lamp lamp with housing |
Warm Noted:
Be sure to use an ELPLP85 Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.